Tube Fabricating Equipment List      go back Laser Equipment 2005 Mazak Fabrigear 150 3D Tube & Pipe Laser Material Sizes from .750" to 6" Round or Square Cutting Capabilities    Steel: .800" Thick    Stainless: .400" Thick    Aluminum: .375" Thick Can Handle Angle Iron, Channel, I-Beam and Virtually Any Profile That Fits Within a 6" Square Tube Bending 2006 Starbend 450 CN6GI Interpolation/Mandrel CNC Bending Machine Capacity    Round Material 9/32" - 1 ¾"    Square ½" - 1 ¼" Capable of Bending Profiles, Extrusions, Flats, Angles, Etc. Wall Thickness Varies Depending Upon Bend Radius Needed 1992 Tauring Alfa 40H1 Roller Capacity    Angle Iron 2" x 2" x .250"    Flats On Edge 2" x .375"    Flats On Flat 2.375" x .750"    Tubes 2.375" x .080 Wall    SQ Tube 1.75" x 1.75" x .100" Wall End Forming Equipment 2007 Aristo S401 End Former Segmented Tool Expansion/Reductions of up to a 3" Dia. Tube to Depth of 4" Rolling Equipment 2008 DAVI "MCA 2520" CNC Four Roll With Crowning Compensation 8" X 9/32" A-36 Plate Standard Rating. Capacity Varies Depending On Material Thickness, Material Type, Radius, & Width. Max Thickness Is 1" Plate. Standard Shapes Include Cylinders, Single Radius, Cones, Multiple Radius, Ovals, Squares, Ellipse, Buckets, Etc.